Function, principle and application field of anti-static and anti-smashing safety shoes

  With the development of science and technology, all kinds of things have been further improved. The production of modern industrial products in the area of protection work, do more and more in place, zero enterprises will be equipped with their own employees with a protective equipment. Which for anti-static anti-smashing safety shoes role, principle and use of the field we know how much?

  The anti-static and anti-smashing safety shoes are the industrial labor protection products, which are mainly used to prevent the human body from carrying static electricity, which may cause combustion, explosion and other places that are dangerous to the feet, for example: petroleum, chemical, coal, printing, rubber, medical, electronic and other production enterprises of the workplace, the sole made of Pu Materials, uppers made of Pu Leather. Anti-static shoes that can eliminate the accumulation of static electricity and prevent electric shock below 250V, but their main function is not anti-static, but more attention to safety.

  Anti-smashing: anti-static anti-smashing safety shoes with a piece of High-strength low-alloy steel at the toe, able to withstand heavy blows. Strong anti-smashing performance, even if there is a heavy object from high altitude to hit the feet, but also to ensure that the staff's feet are not damaged, the front of the feet and toes will not be hurt.

  Test Method: a steel hammer of specified weight may be used for impact testing. The clearance height under Baotou Baotou shall be less than the specified value at the time of impact and no penetrating cracks shall appear in the test axis direction in Baotou.

  Anti-puncture: anti-static safety anti-smashing shoes also have anti-puncture performance, can effectively protect the feet from sharp objects pierced, is a kind of protective shoes!

  Testing method: the testing machine is equipped with a pressure plate, the pressure plate is equipped with a test nail, the test nail is a cutting tip head, the hardness of the nail head should be greater than 60 HRC, the sole sample is placed on the chassis of the testing machine, the position allowed the test nail to pierce through the outsole, and the test nail pierced the sole at a speed of 10 mm/min ± 3 mm/min until penetration, recording the required maximum force.